Wolo 336 Juke Box User Manual download pdf

Your purchase of a WOLO horn is a perfect choice to compliment your vehicle. Our horns are manufactured

with the finest of materials. Each horn is bench tested before it is packaged to assure workmanship and quali-

ty, so you will have many years of reliable service.

IMPORTANT: THIS HORN SHOULD NOT BE USED AS A REPLACEMENT FOR VEHICLE ORIGINAL

EQUIPMENT HORN. ADDITIONALLY, IT IS NOT TO BE USED AS A WARNING DEVICE. MODEL 336 JUKE

BOX IS FOR OFF THE ROAD AND SHOW USE.

MOUNTING CONTROL KEYBOARD

1. Select a mounting location that will not interfere with air bags or drivers vision.

2. Using the double-sided foam adhesive tape provided, mount the keyboard to selected location. Make sure

that mounting surface is free from dust, wax etc. A clean surface is necessary so that double-sided tape will

hold properly. IMPORTANT: ADHESIVE HOLDING POWER BECOMES MAXIMUM IN ABOUT 24 HOURS.

LIMIT MOVING OR PUTTING PRESSURE ONTO THE KEYBOARD UNTIL THEN.

MOUNTING SPEAKER

3. Select a convenient location in the engine compartment

that is dry and safe from the engines exhaust manifold heat.

Always face the speaker in a downward position. This will

help prevent water from entering into the speaker. Using the

speakers mounting bracket as a template, mark hole loca-

tions (3) and drill using a 1/8 inch drill bit. Secure speaker

with self tapping screws provided (3). Make sure that the

speakers opening is not blocked by any components which

could reduce its loudness.

WIRING

4. TWIN BLACK, is connected to the speaker in the engine compartment. Route wires through fire wall to

speaker. Connect either wire to one of the speaker wires. Then connect remaining wire to other speaker wire.

5. RED WIRE, is connected to the fuse-block or a under dash wire that has power (+) 12 volts when the ignition is

on.

6. SINGLE BLACK WIRE, is grounded. Secure wire under a bolt in the dashboard area, make sure that the METAL

surface around the bolt is clean of rust and paint to make a good electrical connection.

TESTING

7. Make sure all wires are secured and connections are properly taped.

8. Put the vehicles ignition on to power your JUKE BOX during testing.

9. Turn the JUKE Box’s VOLUME control to the right. The green LED power indicator will illuminate to show

that the horn is now ON.

OPERATION

A. TO PLAY MUSIC: Press the button marked channel A or channel B once. The Juke Box will beep and

the orange LED marked music will be illuminated. Using The numbered 1-17 keys you can now play your

desired musical tune. Each of the numbered keys plays two different musical tunes. Pressing the Channel A

or channel B button before the number keys will change the musical tune played. Use the on/off VOLUME

switch to control the loudness.

Installation and Operating Instructions for

MODEL 336 JUKE BOX

ELECTRONIC HORN

TWIN BLACK

RED

FUSE 3 AMP

+ 12 VOLTS

GROUND

BLACK

1 2

Summary of Contents

Page 1 - ELECTRONIC HORN

Your purchase of a WOLO horn is a perfect choice to compliment your vehicle. Our horns are manufacturedwith the finest of materials. Each horn is benc

Page 2 - WARRANTY

B. TO PLAY PIANO: Press the button marked PIANO, the yellow LED marked PIANO will be illuminated.Buttons numbered 1-17 can be used as a piano keyboard

Wolo 336 Juke Box User Manual

Browse online or download User Manual for Equipment Wolo 336 Juke Box. Wolo 336 Juke Box User Manual

Summary of Contents

More documents for Equipment Wolo 336 Juke Box

Comments to this Manuals

Wolo 336 Juke Box User Manual

Browse online or download User Manual for Equipment Wolo 336 Juke Box. Wolo 336 Juke Box User Manual

Summary of Contents

More documents for Equipment Wolo 336 Juke Box

Comments to this Manuals

Related products and manuals for Equipment Wolo 336 Juke Box