Wolo 380-2T Full Blast User Manual download pdf

INSTALLATION INSTRUCTIONS

Model 310-2T, 315-2T, 380-2T & 385-2T

Your purchase of a Wolo horn is a perfect choice to compliment your vehicle. Wolo’s products are manufactured with the

finest materials. Each horn is tested to ensure it meets all manufacturing specifications, before it is packaged. If you

need help installing this product, our technicians are available to answer your questions, Monday through Friday from 9

AM to 4 PM EST by calling 1-888-550-HORN (4676).

MOUNTING FIG. #1

1. Remove the factory horn, and install your new Wolo horn in the same posi-

tion with the opening of the horn facing downward to prevent dirt and water

from entering into the horn. Secure the horn to the vehicle using the bracket

and hardware provide.

IMPORTANT: For one (1) terminal factory horn system, the grounding jumper

wire needs to be secured under the mounting bolt before securing horn to a

metal body grounding surface. Fig. #2

TWO (2) TERMINAL WIRING FIG. #1

2. For vehicles where the factory horn wires connect to two (2) horn terminals,

simply transfer the factory horn wires to new Wolo horn. It doesn’t make a

difference which horn terminals are used on your new Wolo horn when trans-

ferring the wires from your factory horn. IMPORTANT: Always make sure that

there is a 10-amp fuse used in the horn circuit to protect the vehicle. If the

wire terminals that were connected to your vehicle’s factory horn doesn’t con-

nect to your new Wolo horn, provided in the kit is two-(2) 1/4” push-on insu-

lated terminals. The installation is complete and the horn is ready to be used.

ONE (1) TERMINAL WIRING FIG. #2

3. For vehicles where the factory horn wire connects to only one (1)

horn terminal. Transfer the factory horn wires to your new Wolo

horn. It doesn’t make a difference which horn terminal is use when

transferring the wire from your factory horn.

4. Using the grounding wire supplied, place the loop end under the

mounting bolt of the horn and firmly tighten. Make sure the horn’s

mounting bracket is secured to a metal body surface that is clean

of paint and rust.

5. Attach the grounding wire’s female terminal to the horns unused

terminal. IMPORTANT: Always make sure that there is a 10-amp

fuse used in the horn circuit to protect the vehicle. Installation is

complete. If the wire terminal that was connected to your vehicle’s

factory horn doesn’t not connect to your new Wolo horn, provided

in the kit is two-(2) 1/4” push-on insulated terminals.

WARRANTY

Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date of

purchase, that this product is free from defects in workmanship and materials. If there is such a proven defect,

Wolo, at its option, will either repair or replace the item free of charge, if it is returned to Wolo within three months

from the date of purchase together with proof of purchase as described below. Wolo reserves the right to inspect

any defect prior to settling any warranty claim by repair or replacement. This warranty is limited as above provided

and Wolo will not be responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use, modifi-

cations, faulty installation of this product, or natural causes.

ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WAR-

RANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO

A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR

ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF

BREACH OF WARRANTY OR OTHERWISE.

To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase.

Provide with the return a brief description of the problem. Also, include with the return a check or money order in the

amount of $10.00 to cover return shipping. Mail to:

Wolo Manufacturing Corp.

One Saxwood Street, Deer Park, NY 11729 Attn: Warranty Service

E-mail: [email protected]

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSModel 310-2T, 315-2T, 380-2T & 385-2TYour purchase of a Wolo horn is a perfect choice to compliment your vehicle. Wolo’s

Wolo 380-2T Full Blast User Manual

Browse online or download User Manual for Equipment Wolo 380-2T Full Blast. Wolo 380-2T Full Blast User Manual

Summary of Contents

More documents for Equipment Wolo 380-2T Full Blast

Comments to this Manuals

Wolo 380-2T Full Blast User Manual

Browse online or download User Manual for Equipment Wolo 380-2T Full Blast. Wolo 380-2T Full Blast User Manual

Summary of Contents

More documents for Equipment Wolo 380-2T Full Blast

Comments to this Manuals

Related products and manuals for Equipment Wolo 380-2T Full Blast