Wolo 365 The Enforcer User Manual download pdf

Your purchase of a WOLO horn is a perfect choice to

compliment your vehicle. Our horns are manufactured

with the finest of materials. Each horn is bench tested

before it is packaged to assure workmanship and quality,

so you will have many years of reliable service.

IMPORTANT: THIS HORN SHOULD NOT BE USED AS

A REPLACEMENT FOR VEHICLE‘S ORIGINAL

EQUIPMENT HORN. MODEL 365 IS NOT TO BE USED

AS A SIGNALING OR WARNING DEVICE. MODEL 365

THE ENFORCER™ IS FOR OFF THE ROAD AND

SHOW USE.

MOUNTING CONTROL KEYBOARD

1. Select a mounting location that will not interfere with

air bags or drivers vision.

2. Using the double-sided foam adhesive tape provided,

mount the keyboard to selected location. Make sure that

mounting surface is free from dust, wax etc. A clean

surface is necessary so that double-sided tape will hold

properly. IMPORTANT: ADHESIVE HOLDING POWER

BECOMES MAXIMUM IN ABOUT 24 HOURS. LIMIT

MOVING OR PUTTING PRESSURE ONTO THE

KEYBOARD UNTIL THEN.

MOUNTING SPEAKER

3. Select a convenient location in the engine

compartment that is dry and safe from the engines

exhaust manifold heat. Always face the speaker in a

downward position. This will help prevent water from

entering into the speaker. Using the speakers mounting

bracket as a template, mark hole locations (3) and drill

using a 1/8 inch drill bit. Secure speaker with self tapping

screws provided (3). Make sure that the speakers

opening is not blocked by any components which could

reduce its loudness.

WIRING

4. TWIN BLACK is connected to the speaker in the

engine compartmnt. Route wires through fire wall to

speaker. Connect either wire to one of the speaker wires.

Then connect remaining wire to other speaker wire.

5. RED WIRE, is connected to the fuse-block or a under

dash wire that has power (+) 12 volts when the ignition is on.

IMPORTANT: To protect your horn and vehicle, use the in-

line fuse provided and wire as shown.

6. SINGLE BLACK WIRE, is grounded. Secure wire under a

bolt in the dashboard area, make sure that the METAL

surface around the bolt is clean of rust and paint to make a

good electrical connection.

TESTING

7. Make sure all wires are secured and connections are

properly taped.

8. Put the vehicle‘s ignition on to power the Enforcer™

Horn during testing.

9. Press each of the four (4) buttons on the keyboard

and The Enforcer™ will sound either one of three the

siren or the air horn sounds.

If you need help installing your new Wolo horn, our technicians are

available to answer your questions, Monday thru Friday, from 9 AM

to 4 PM EST at 1-888-550-4676.

Warranty

Wolo Manufacturing Corporation (“Wolo”) warranties to the

original purchaser, for three months from the date of

purchase, that the product is free from defects in

workmanship and materials. If there is such a proven defect,

Wolo, at its option, will either repair or replace the item free

of charge, if it is returned to Wolo within three months from

the date of purchase together with proof of purchase as

described below. Wolo reserves the right to inspect any

defect prior to settling any warranty claim by repair or

replacement. This warranty is limited as above provided and

Wolo will not be responsible for fire or other casualty or

accident, due to neglect, abuse, abnormal use, modifications,

faulty installation of this product, or natural causes.

MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR

PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF THREE

(3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO

BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR

ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER

ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.

To obtain warranty service, return the product prepaid, and

include the original bill of sale showing the date of purchase.

Include a brief description of the problem and your telephone

number. Also, include a check or money order in the amount of

$10.00 to cover return shipping.

Mail to:

Wolo Manufacturing Corp.,

One Saxwood Street, Deer Park, NY 11729

Attn: Warranty Service E-mail: [email protected]

Installation and Operating Instructions for

MODEL 365 THE ENFORCER™

ELECTRONIC HORN

This horn is for OFF THE ROAD AND SHOW USE

MANUFACTURING CORP. - Deer Park, New York 11729

Visit Wolo on the World Wide Web: http:/www.wolo-mfg.com

Summary of Contents

Page 1 - ELECTRONIC HORN

Your purchase of a WOLO horn is a perfect choice tocompliment your vehicle. Our horns are manufacturedwith the finest of materials. Each horn is bench

Wolo 365 The Enforcer User Manual

Browse online or download User Manual for Equipment Wolo 365 The Enforcer. Wolo 365 The Enforcer User Manual

Summary of Contents

More documents for Equipment Wolo 365 The Enforcer

Comments to this Manuals

Wolo 365 The Enforcer User Manual

Browse online or download User Manual for Equipment Wolo 365 The Enforcer. Wolo 365 The Enforcer User Manual

Summary of Contents

More documents for Equipment Wolo 365 The Enforcer

Comments to this Manuals

Related products and manuals for Equipment Wolo 365 The Enforcer